-
-
-
Application
-
-
-
-
Service
2019 New Kinetic Energy • Qingdao Exhibition and Business Negotiation Conference Preview
Published Time:
Oct 07,2019
The 2019 New Kinetic Energy • Qingdao Exhibition and Fair will be held at the Qingdao International Convention and Exhibition Center from October 19th to 21st, 2019. Nobot will participate in the exhibition with its non-metallic five-axis machining center, six-axis robot, and automatic loading and unloading device.
The 2019 New Kinetic Energy Qingdao Exhibition and Business Negotiation Conference will be held at the Qingdao International Convention and Exhibition Center from October 19th to 21st, 2019. Nobot will participate in this exhibition and business negotiation conference with non-metallic five-axis machining centers, six-axis robots, and automatic loading and unloading devices.
Exhibit
Products
Non-metallic five-axis machining center
The Nobot non-metallic five-axis machining center adopts an advanced gantry-type dual-worktable mobile structure, with the perfect milling technology characteristics of a high-speed milling machine. The mobile worktable ensures that the machine tool has optimal dynamic motion characteristics and optimal drive rigidity. The worktable moves smoothly in the axial direction, and during processing, the five-axis drive tool moves around the workpiece, achieving five-axis linkage three-dimensional movement. Single worktable processing and uninterrupted production processing on another worktable are possible. Main application industries include: thermoforming, automotive interiors, sanitary ware, handicrafts, and home appliances.
Technical Parameters
| Item | NF5-1430-F | NF6-1826-F | NF5-2025-F | NF5-2230-F | |
| Maximum Travel Range | X-axis/Y-axis/Z-axis | 1200/2800/600 | 1800/2600/900 | 2000/2500/800 | 2200/3000/900 |
| C-axis/A-axis | ±360°/±110° | ±360°/±110° | ±360°/±110° | ±360°/±110° | |
| Maximum Working Speed | X-axis | 20m/min | 20m/min | 20m/min | 20m/min |
| Y-axis | 20m/min | 20m/min | 20m/min | 20m/min | |
| Z-axis | 12m/min | 12m/min | 12m/min | 12m/min | |
| C-axis | 37.5r/min | 37.5r/min | 37.5r/min | 37.5r/min | |
| A-axis | 37.5r/min | 37.5r/min | 37.5r/min | 37.5r/min | |
| Repeat Positioning Accuracy | ±0.10mm | ±0.10mm | ±0.10mm | ±0.10mm | |
Nobot Six-Axis Robot Multi-Application Demonstration
As a domestic "top 100" robot system integrator, Nobot has independently developed the NT6 series of six-axis robots. Currently, Nobot six-axis robots can perform handling, palletizing, assembly, and machine tool loading and unloading operations.
Nobot Loading and Unloading Device
The Nobot automatic loading and unloading device uses an automatic conversion rack to ensure uninterrupted continuous production; The material storage machine uses a secondary positioning method to ensure product positioning accuracy and smooth product molding. ; The material storage machine feeding device is a hydraulic mechanism, which can reduce the material picking stroke and ensure the equipment feeding efficiency at 1200PCS/H; The communication interface is a collision-proof structure to avoid interface damage due to external factors; For product sticking, our company has developed a segmented storage machine to deal with product sticking problems.
Nobot's booth number is B170 in Hall 3. We welcome customers and partners to visit us. We sincerely look forward to your arrival!
2019 New Kinetic Energy Qingdao Exhibition and Business Negotiation Conference
Time: October 19-21, 2019
Location: Qingdao · International Convention and Exhibition Center
Booth No.: Hall 3 B170
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.