-
-
-
Application
-
-
-
-
Service
Why is the Nobot five-axis engraving machine so efficient?
Published Time:
Mar 22,2019
The efficiency of the Nobot five-axis carving machine is relatively high due to the above points. Currently, its efficiency is significantly better than that of traditional machining centers. Although the initial investment in this type of automated machining center is quite costly, it is more durable and time-saving in the long run. Therefore, enterprises may consider replacing traditional manual processing with the Nobot five-axis carving machine.
Non-metallic five-axis engraving machine It can greatly improve the efficiency of enterprises, and the five-axis engraving machine has become an important equipment for many enterprises. Many people also say that the advent of the engraving machine is a revolution in the history of human technological development. In the field of non-metal and metal processing, Nobot non-metal five-axis engraving machine is even more known as a leader. So why is the five-axis engraving machine so efficient?
1. Wide processing range and high precision
The five-axis engraving machine has five axes of motion, namely XYZ linear axes and AC rotary axes. It mainly has two more rotary axes than conventional machining centers, so it can process parts that are difficult or impossible to process with conventional three-axis machining centers. In simple terms, the processing range of a five-axis machining center is wider than that of a conventional three-axis machining center. The five-axis machining center has two rotary axes, which can perform multiple processes and multiple surface machining with one workpiece clamping, which generally improves the processing efficiency, avoids the precision errors caused by multiple clamping, and thus improves the processing precision. The five-axis machining center can process various complex curved surfaces, such as impellers and blades, which can all be processed.
2. High safety and low daily failure rate
It has self-diagnosis and self-repair functions. During the entire working state, the system continuously self-diagnoses and checks the control system itself and various equipment connected to it. Therefore, the five-axis engraving machine can maintain high-efficiency operation for a long time, making the production efficiency of the enterprise more considerable. This is because the failure rate of the Nobot five-axis engraving machine is extremely low, especially the tools and machine tool parts have undergone corresponding impact tests, acid-base corrosion tests, and vibration tests, reducing the failure rate and allowing the equipment to easily complete work tasks with high efficiency.
3. Scientific system operation
The five-axis engraving machine integrates computer control, high-performance servo drive, and precision machining technology, and is used to process continuous, smooth, and complex curved surfaces. The current equipment uses PLC end control to reduce the manual operation link, and machine control also greatly improves the efficiency of numerical control processing. Not only that, the system operation of the information numerical control five-axis machine is more scientific, and the efficient operation is ensured through manual monitoring and barrier-free operation. Moreover, subsequent problems caused by programming errors or improper operation during the entire work process are also curbed.
It is because of the above points that the efficiency of the Nobot five-axis engraving machine is relatively high. At present, its efficiency is significantly better than that of traditional machining centers. Although this type of automated machining center requires a lot of financial investment, it is more durable and time-saving in the long run, so enterprises may consider replacing traditional manual processing with the Nobot five-axis engraving machine.
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.