-
-
-
Application
-
-
-
-
Service
Nobot robot conducts fire drills
Published Time:
Mar 07,2019
At 9:30 am, the fire drill officially began. The fire alarm sounded, and all personnel of the welding team evacuated in an orderly manner via the fire escape and designated evacuation routes, reaching a safe zone as quickly as possible.
To enhance employee fire safety awareness and escape and self-rescue capabilities, Nobot Robot Machine Welding Team organized a fire evacuation and on-site fire-fighting drill, with all welding team employees participating in the drill.
At 9:30 am, the fire drill officially began. The fire alarm sounded, and all personnel of the welding team used the fire stairs to evacuate orderly according to the designated evacuation routes, and evacuated to a safe area in the first instance.
The fire safety training was lectured by Mr. Chen from the Production Management Department. It mainly included detailed explanations of fire equipment introduction and use, fire extinguishing methods and precautions, fire hazards, emergency self-rescue common sense, etc. The training had high practicality and operability, enriching employees' fire safety knowledge. To put the learned knowledge into practice, the use of fire extinguishers was popularized among employees. After the training, a fire extinguishing drill with various types of fire extinguishers was held in the second workshop. The process emphasized the use skills and precautions of various fire extinguishers. Welding team employees took turns in practical operation and finally mastered the use of fire extinguishers.
During the drill, participating employees responded calmly and completed the drill tasks, including using fire extinguishers to extinguish the fire source in time, safe evacuation of personnel in emergencies, opening outdoor fire hydrants, and connecting pipeline water guns.
Employees who participated in the fire drill all said that they benefited a lot, enhanced their fire safety awareness, and improved their understanding of fire hazards and fire extinguishing, escape, and self-rescue skills.
The company regards fire management as a priority, widely mobilizing employees to pay attention to fire safety, vigorously popularizing fire safety knowledge, improving employees' fire safety awareness and self-defense and self-rescue capabilities, creating a strong atmosphere of all-staff participation in fire prevention, achieving the goal of "all-staff participation, fire prevention," and implementing fire safety work throughout the safety production work.
Zhang Zhanbin, the company's safety management director, pointed out that the company's safety work in 2018 was in good condition, with no safety production accidents. He hoped that all colleagues would continue to maintain a good safety work style. At the same time, we must establish the concept that "safety work is no small matter." We must be highly vigilant in our thinking and effectively carry out safety production work in 2019 to ensure that the safety production situation remains stable and positive, creating a good production environment for the company's production and operation development.
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.