-
-
-
Application
-
-
-
-
Service
Safety regulations for Nobot five-axis engraving machine
Published Time:
Feb 15,2019
For your personal safety, please carefully read the Nobot five-axis engraving machine operation manual. Familiarize yourself with the machine's applications and limitations, as well as potential hazards associated with the machine.
1. Getting to know your machine
Nobot Five-Axis Carving Machine Safety Regulations
For your personal safety, please carefully read the Nobot five-axis carving machine Operating Manual Familiarize yourself with the machine's applications and limitations, as well as potential hazards associated with the machine.
2. Keep the work area clean.
Cluttered areas and workbenches can cause accidents.
3. Unauthorized personnel must not approach.
All visitors must maintain a safe distance within the work area.
4. Do not force the machine to operate.
Allow the machine to perform its work safely at its designed speed. Use the correct tools and do not force the machine or attachments to perform work.
5. Wear appropriate clothing.
Avoid wearing loose clothing, gloves, necklaces, bracelets, or jewelry that could be caught in moving parts. It is recommended to wear non-slip shoes and a hat that covers long hair.
6. Do not maintain the machine while it is in operation.
The machine should be properly maintained. However, maintenance should not be performed while the machine is energized or running. 7. Properly ground the machine.
Before installing and using the machine, a reliable ground connection must be established using a conductor to prevent accidental electric shock.
8. Power off for maintenance.
Before maintenance, replacement of parts, or assembly and reassembly of the motor, the power to the machine must be disconnected from the power source.
9. Use recommended accessories.
Refer to the manual for recommended accessories. Purchasers may only use the fixed configurations and consumable components specified by this company.
10. Supervise operation.
Do not allow the machine to run unattended. When the operator leaves, turn off the machine immediately.
11. Ventilation.
If the materials processed by the machine produce irritating or toxic gases, an exhaust hood should be installed according to the actual situation, and good ventilation should be maintained indoors.
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.