-
-
-
Application
-
-
-
-
Service
Why is intelligent automated warehouse considered a future development trend, and what are the differences between traditional warehouses and intelligent automated warehouses?
Published Time:
Nov 15,2018
Due to the rapid increase in national land costs, in order to store as much goods as possible in the same area, we can only develop vertically; high-bay warehouses can be very high, generally recommended to be 24 meters high, while ordinary forklift warehouses are generally 8 or 9 meters high; if the same amount of goods is stored, the investment in high-bay warehouses is less than that of ordinary forklift warehouses, because the land cost is too high.
| Traditional Warehouses vs. Smart Automated Storage and Retrieval Systems (AS/RS): A conventional warehouse typically refers to a forklift warehouse where goods are manually stored and retrieved using forklifts. 。 Automated smart AS/RS, also known as smart automated storage, utilizes the collaboration of automated storage equipment and computer management systems to achieve high-level rationalization, automated storage and retrieval, and simplified operation of the AS/RS. Automated AS/RS is mainly composed of shelves, stacker cranes (stackers), inbound/outbound workstations, dispatching control systems, and management systems. By combining different types of software, hardware, and systems, various operating modes such as standalone manual, standalone automatic, online control, and networked control can be achieved within the AS/RS, realizing three-dimensional storage, automatic retrieval, and standardized management of warehouse goods. This can significantly reduce storage and transportation costs, lighten labor intensity, and improve warehouse space utilization. Differences between the two: The differences between smart automated storage and retrieval systems and traditional warehouses are: reduced errors; improved operational efficiency; increased space utilization; saved land investment costs; improved working environment for employees; lowered labor costs; achieved overall system optimization; and enhanced enterprise production efficiency and modern management levels. Development Trend: Due to the rapid increase in national land costs, if one wants to store as much goods as possible within the same area, then development can only move towards height; AS/RS can be built very high, generally recommended 24 meters high, while ordinary forklift warehouses are generally 8-9 meters high. If storing the same quantity of goods, the investment in AS/RS is less than that of ordinary forklift warehouses, because land costs are too high. 。 Nobot Intelligent Equipment (Shandong) Co., Ltd. is a specialized company engaged in the research, development, production of industrial robots, automated AS/RS, equipment modification, and overall industrial automation solutions. 。 Projects include: non-standard robot design and manufacturing , robot series, three-axis robots, Cartesian robots, robotic arms, manipulators, small universal robots, handling robots, automated tracks, automated logistics equipment, automated guided vehicles （ AGV ） , automation solutions, machine tool automation transformation, automation design, equipment modification etc. Website: www.nobot.cc Phone: 86-400-823-3356
|
Previous
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.