-
-
-
Application
-
-
-
-
Service
What are the installation and commissioning steps for a large CNC machining center?
Published Time:
Oct 18,2023
After the bed body structure is completed, artificial aging treatment is carried out to reduce the deformation of the bed body. The bed body, columns, beams and other parts are transported into the workshop for assembly. Detection technology is used to check the assembly accuracy of these parts, and adjust the installation accuracy of transmission parts such as guide rails, racks and screws. After all transmission parts are installed, power wiring and debugging are carried out. Power debugging is completed…
Large gantry five-axis CNC machines can be programmed to perform a variety of complex machining tasks, such as cutting, drilling, and milling. These machines are widely used in aerospace, automotive manufacturing, and shipbuilding, and can efficiently and precisely process various composite materials. The feature of five-axis CNC is that it can perform five-axis linkage, allowing for machining at multiple angles in a single clamping, thus reducing processing time and cost. At the same time, it can perform 24-hour uninterrupted processing, greatly improving production efficiency. The installation and debugging process of five-axis CNC is very complex, requiring strict operating procedures and precise debugging techniques. Below, Xiaonuo will introduce the installation steps of the Nobot five-axis machining center:
1. After the completion of the bed structure, artificial aging treatment is carried out to reduce the deformation of the bed.
2. Transport the bed, column, beam and other components into the workshop for assembly.
3. Use detection technology to check the assembly accuracy of these components and adjust the installation accuracy of transmission components such as guide rails, racks and screws.
4. After the installation of all transmission components is completed, connect and debug the power supply.
5. After the power supply debugging is completed, install the beam on the column, and then adjust the levelness of the worktable and the parallelism between the axes.
6. Carry out overall machine debugging, including running-in and precision debugging.
7. Finally, the machine tool is accepted by the sales, R&D, after-sales, and workshop production departments. After passing the acceptance, it can be shipped.
Specific steps may vary depending on the actual situation. Xiaonuo's sharing is for reference only!
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.