-
-
-
Application
-
-
-
-
Service
Achieve staff reduction and efficiency improvement with high speed and high precision - Die casting polishing robot system
Published Time:
May 20,2020
The advantages of polishing robot automation technology are incomparable to manual labor. With the development of the social economy and the application of high-tech, more and more Chinese factories and enterprises are realizing that automated production is the solution to the current direction of enterprise development. If you want to learn more about enterprise automation and related information, please contact: Nobot Intelligent Equipment (Shandong) Co., Ltd., Tel: 4008233356 86-635-2932233
Currently, cast iron and cast aluminum castings are increasingly widely used. Because castings require the removal of risers, flash, and burrs during processing, the grinding process is particularly important. However, cleaning and grinding castings is a very laborious task, with poor working conditions (high temperature, dust, dirty environment), and high labor intensity. Traditional casting grinding processes mainly rely on manual grinding wheels, which not only have low grinding efficiency but also cannot guarantee the quality requirements of the parts.
The rising cost of labor increases the burden on casting enterprises. Meanwhile, the dusty grinding environment poses a great threat to workers' health. Occupational disease prevention and workers' compensation further increase labor costs. Poor working conditions and high labor intensity have also led to difficulties in recruiting workers. With the improvement of people's living standards and the strengthening of health awareness, many foundries are finding it increasingly difficult to recruit grinding workers. Therefore, the use of robots to replace manual labor in the casting industry, especially in the casting cleaning and grinding process, has become an inevitable trend.
To solve the problems of time-consuming and labor-intensive grinding of pouring gates and parting lines in dangerous environments with dust and noise, and unstable product quality in the foundry industry, Nobot's R&D team has focused on independent innovation. After three years of development, they have developed an intelligent grinding robot. Many of its technologies fill domestic gaps and can fully meet the needs of intelligent cleaning and grinding in the foundry industry and other related industrial manufacturing fields. It identifies, measures, and inspects products during production and delivery to ensure quality, helping companies produce defect-free products at higher speeds and lower costs, improving product quality, increasing productivity, and enhancing market competitiveness.
★Introduction to Nobot Intelligent Grinding Robot★
Performance Characteristics:
Small installation area; simple teaching and programming operation; stable performance, high production efficiency; the equipment has excellent rigidity, and the good mechanical structure can achieve high efficiency in grinding cast iron and cast steel products;
High level of equipment automation, saving more workers and reducing labor costs; it can quickly, reliably, and safely complete workpiece loading and unloading during equipment operation, shortening the equipment's idle time and improving work efficiency; in addition, only the tray needs to be replaced to change the fixture.
Simple equipment operation, quick to learn; the equipment's software has self-diagnosis and self-repair functions, as well as precision compensation functions, requiring no highly educated personnel to operate;
Intelligent management, automatic parameter setting and tool management system, dynamic monitoring and adaptive control functions, etc., can automatically upload processing data through the MES system to achieve big data sharing;
Product Parameters:
Applicable Workpieces:
★Product Recommendation★
NM-440
NM-230
NM-550
In general, the advantages of robotic grinding automation are unmatched by manual labor. With the development of the social economy and the application of high-tech, more and more Chinese factories and enterprises are realizing that automated production is the solution for the current direction of enterprise development. For more information about enterprise automation, please contact: Nobot Intelligent Equipment (Shandong) Co., Ltd., Tel: 4008233356 86-635-2932233
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.