-
-
-
Application
-
-
-
-
Service
That 5-axis engraving machine that can engrave 360 degrees
Published Time:
Oct 01,2021
Choosing an engraving machine is like choosing a computer; you need to look at the specifications.
Choosing an engraving machine is like choosing a computer; you need to look at the configuration. For the same model, the matching and selection of accessories are very important. Now many accessories are imported, and their precision, performance, and quality are more reliable. There are many factors to consider when evaluating the performance of a woodworking engraving machine. In addition to the overall configuration of the machine, the assembly precision of the machine is even more important. This is mainly reflected in parameters such as the verticality, flatness, positioning accuracy, and repeat positioning accuracy of the axes. The axial verticality mainly affects the dimensional accuracy of the workpiece. A typical manifestation of a large XY-axis verticality is that the diagonals of a rectangle are unequal. A typical manifestation of a large verticality between the Z-axis and the XY plane is that the surface is uneven when using a flat-bottomed cutter for large-interval planar milling. Flatness mainly affects the difficulty of leveling the plate and workpiece. Generally, after the machine is assembled and debugged, the engraving machine table should be milled flat to ensure flatness. Positioning accuracy affects the dimensional error of the workpiece and is mainly determined by the accuracy of the lead screw, the compensation capability of the control system, and changes in ambient temperature. You need to understand it first, and then choose the right equipment according to your requirements. Below, Xiaonuo will introduce a five-axis machine that can engrave with 360-degree rotation without dead angles.
Nobot industrial robots focus on the production and research and development of industrial robots. Since the Nobot factory area was put into production in 2017, it has continuously introduced and absorbed the design concepts and manufacturing technologies of domestic and foreign counterparts, achieving remarkable results in the engraving machine equipment industry. It has independently developed the NF5 series five-axis machining center and actively develops low-cost, high-efficiency products that meet customer needs for customers.
Features of the NF5 series five-axis machining center:
It adopts an advanced gantry-type dual-worktable mobile structure, with the perfect milling technology characteristics of a high-speed milling machine. The mobile worktable ensures that the machine tool has the best dynamic motion characteristics and optimal drive rigidity. The worktable moves smoothly in the axial direction, and during processing, the five-axis drive tool moves around the workpiece, achieving five-axis linkage three-dimensional movement. It can achieve uninterrupted production processing with one worktable being processed and the other worktable being loaded.
Structural Introduction:
X-axis: Horizontal movement of the beam slider (tool) Y-axis: Back and forth movement of the table support Z-axis: Up and down movement of the beam slider (tool) C-axis: Rotational movement of the tool along the Z-axis A-axis: Relative angle movement of the tool and the Z-axis to complete inclined surface processing.
Main Application Industries: Thermoforming industry, automotive interior industry, sanitary ware industry, handicraft industry, home appliance industry
Main Processing Materials: Thermoforming, plastics, polystyrene foam, resin, gypsum, fiberglass, etc.
Technical Parameters
| Item |
NF5-1430-F |
NF6-1826-F |
NF5-2025-F |
NF5-2230-F |
|
| Maximum Travel Range |
X-axis/Y-axis/Z-axis |
1200/2800/600 |
1800/2600/900 |
2000/2500/800 |
2200/3000/900 |
| C-axis/A-axis |
±360°/±110° |
±360°/±110° |
±360°/±110° |
±360°/±110° |
|
| Maximum Working Speed |
X-axis |
20m/min |
20m/min |
20m/min |
20m/min |
| Y-axis |
20m/min |
20m/min |
20m/min |
20m/min |
|
| Z-axis |
12m/min |
12m/min |
12m/min |
12m/min |
|
| C-axis |
37.5r/min |
37.5r/min |
37.5r/min |
37.5r/min |
|
| A-axis |
37.5r/min |
37.5r/min |
37.5r/min |
37.5r/min |
|
| Repeat Positioning Accuracy |
±0.10mm |
±0.10mm |
±0.10mm |
±0.10mm |
|
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.