-
-
-
Application
-
-
-
-
Service
How to operate the Nobot five-axis engraving machine
Published Time:
Jun 09,2019
Just accurately grasp the above five major steps, pay attention to not making mistakes in the minor steps, and with the customer's understanding of the professional knowledge related to engraving machines, you will gradually become proficient in operation.
To save manpower and improve efficiency, many customers choose to purchase five-axis engraving machine Machines replace manual labor. However, many customers have reported that even with the help of instructions, the actual operation is still somewhat unclear and confusing. Reputable engraving machine manufacturers provide additional operating tutorials, but even so, novices still find it difficult to get started. Below, Xiaonuo will share some tips on operating engraving machines.
I. Preparatory work before starting the machine
1. Confirm that the gas source pressure is turned on, normally at 0.3-0.5MPA;
2. Confirm that the main shaft chuck, extension rod, and tool holder are tightened;
3. Confirm that the oil pump is working properly.
II. Preparatory work after starting the machine
1. Ensure that no untrained personnel are allowed to stand around the machine during startup;
2. After starting the machine, observe whether there are any warnings or alarms.
III. Return to mechanical reference zero
The mechanical origin is the mechanical reference zero of the equipment when it leaves the factory. As the name suggests, it is called the mechanical origin. Different systems can manually set their desired mechanical reference points.
IV. Product correction and tool setting
1. The product needs to be corrected in the equipment. The purpose is to ensure that the product we are processing is consistent with the coordinate system defined in the tool path creation. In short, the product has a direction in the XYZ coordinate system, ensuring that it is consistent with the XYZ direction of our machine tool;
2. Product tool setting. The coordinate origin of the product data we define is defined at a certain point. When processing, we point the tool tip to that point. The purpose is to input the mechanical coordinates into the coordinate system compensation, which we call the tool setting point, which is also the X0Y0Z0 of the workpiece coordinate system, also known as the absolute coordinate system X0Y0Z0.
V. Execute and call the product program
The program we have programmed, the machine code, commonly known as (machine code), is imported into the system via a U disk or data cable. Execute and load the program we imported. In automatic mode, simulate the program running with the handwheel. If there are no exceptions, you can switch to automatic one-button start.
After the above operation Then, you can start executing the automatic processing program. As you can see, the operation of the engraving machine is not difficult to master. Just accurately grasp the above five major steps and pay attention to the minor steps to avoid errors. With the customer's understanding of the professional knowledge related to the engraving machine, they can gradually become proficient in operation.
BLOGS
Nobot Group's 2025 Kick-off Event: A Team Building Activity Focused on Unity and Power
This opening ceremony was both a knowledge-boosting session, allowing employees to continuously grow through learning, and a team-building event, bringing everyone closer together. It impressed upon each employee that in today's increasingly competitive market, only by continuously learning new knowledge, daring to innovate, and maintaining teamwork can we remain undefeated. With the collective efforts of all employees, Nobot will surely ride the waves and achieve even greater success on this new journey, steadily advancing towards higher goals!
Nobot was invited to attend the Belt and Road International Exchange Conference
On July 28, 2024, the 2024 Liaocheng "Belt and Road" International Exchange Conference and the Unveiling Ceremony of the Central Asia International High-end Talent Joint Training Base were held in the Liaocheng High-tech Zone University Science and Technology Park. Professor Tursunbayev Zaporotot, President of Osh Technological University of the Kyrgyz Republic and corresponding academician of the Kyrgyz Academy of Engineering, and Academician Smaylor Erta of the Kyrgyz Academy of Engineering and the Russian Academy of Natural Sciences, among other experts and scholars from "Belt and Road" countries, participated in the event. Liaocheng Deputy Mayor Wang Gang and Zhang Ya, Party Secretary and Director of the Management Committee of the High-tech Zone, attended the event and delivered speeches.
This training event not only provided a valuable learning opportunity for company managers and key personnel, but also built a platform for communication and sharing. During the training, everyone actively interacted and discussed enthusiastically, exploring effective ways to improve management capabilities together. Through this training, everyone has gained rich knowledge and skills, but more importantly, it has inspired confidence and motivation for the future.
How to use a five-axis machining center efficiently? Today, let's learn a few practical steps!
When using a five-axis machining center, the equipment must first be adjusted to ensure that the workpiece and fixture dimensions precisely match, and that the zero points of each axis are accurately adjusted.
Why do composite materials require 5-axis CNC machining?
Composite materials are widely used in various fields such as aerospace, automotive, construction, energy, energy storage, infrastructure, marine, pipelines and tanks, sports and entertainment, and transportation due to their light weight, high fatigue resistance, and strong fracture resistance. Among them, aerospace and automotive industries are the largest application markets for composite materials. Five-axis CNC plays an important role in the processing of composite materials. Why do composite materials need to be processed using five-axis CNC?
Dual-station five-axis machines offer several significant advantages. First, while one station is being machined, the other can be used for material loading and unloading, ensuring continuous, non-stop machining and significantly improving production efficiency. Second, the dual-station design makes operation more convenient and reduces waiting time. However, dual-station five-axis machines typically cost more than single-station machines and may require more operating and maintenance space.
Nobot Intelligent Equipment Group Co., Ltd.
Pre-sales consultation:86-635-2932233
Fax:86-635-2945333
After-sales consultation:86-635-5086881 / 86-635-2936881
National unified service hotline:86-400-823-3356
Email:nuobote@nobot.cc
Address: No. 1 Plant, No. 88 Huanghe Road, Gaoxin District, Liaocheng City, Shandong Province
copyright © 2025 Nobot Intelligent Equipment Group Co., Ltd.